Download Complete Operator Manual for John Deere 335C, 435C (C SERIES) LOG LOADER | Publication Number F390693

Serial Number : 011258–129843 - 012255

"Enhance your knowledge and skills with the F390693 - JOHN DEERE 335C, 435C (C SERIES) LOG LOADER OPERATOR MANUAL. This manual, written by industry experts, provides essential information and operation instructions for the C series log loaders, helping you to maximize your performance and efficiency on the job."

Operator Model Covered:
JOHN DEERE 335C, 435C

Operator Manual Contents:
Safety - Safety and Operator Conveniences
335C / 435C Log Loader Safety and
Operator Convenience Features.
Safety General Precautions
Recognize Safety Information.
Follow Safety Instructions.
Operate Only If Qualified
Wear Protective Equipment
Avoid Unauthorized Machine Modifications.
Inspect Machine.
Stay Clear of Moving Parts.
Avoid High-Pressure Oils
Avoid High-Pressure Fluids
Beware of Exhaust Fumes.
Prevent Fires.
Prevent Battery Explosions.
Handle Chemical Products Safely.
Dispose of Waste Properly.
Prepare for Emergencies
Safety - Operating Precautions
Use Steps and Handholds Correctly.
Start Only From Operator's Seat
Use and Maintain Seat Belt
Prevent Unintended Machine Movement
Avoid Work Site Hazards
Use Special Care When Operating Loader.
Keep Riders Off Machine
Avoid Machine Tip Over.
Use Care When Swinging Machine
Add and Operate Attachments Safely.
Safety Maintenance Precautions
Park And Prepare For Service Safely.
Service Cooling System Safely.
Remove Paint Before Welding or Heating
Make Welding Repairs Safely.
Drive Metal Pins Safely
Safety - Safety Signs
335C/435C Log Loader Safety Signs.
Operation - Operator's Station
335C/435C Operator's Compartment
Component Locator.
Battery Disconnect Switch
Gauges
Ignition Switch
Throttle Switch.
Horn Button
Switches.
Indicator Lights.
Swing Control Pedal.
Joysticks.
Interior Light.
Cab Air Circulation Fan
Adjusting Manual Suspension Seat
Pilot Shutoff Whisker Switch.
Pilot Shutoff Armrest Switch.
AC/Heater Controls - Option
Lighter and Powerpoint Socket.
AM/FM Radio.
CB Radio
Fuses and Circuit Breakers
Secondary Exit.
Operation - Operating the Machine
335C / 435C Log Loader Component
Locator.
Optional Attachments.
Pre-Start Checks
Throttle Switch.
Normal Engine Starting
Using a Battery Charger.
Cold Weather Warm-Up.
Idling
Stopping the Engine.
Anti-stall Valve and Anti-stall Valve
Bypass Switch (435C Option only)
Loader Operation - General.
Stabilizers Raise/Lower
Turntable Rotation
Main Boom Raise/Lower.
Stick Boom Raise/Lower.
Grapple Open/Close.
Grapple Rotate.
Transporting the Log Loader
Manual Lowering of Main Boom..
Maintenance - Machine
Fluids and Lubricants Specifications Table
Break-in Engine Oil
Diesel Engine Oil
Swing Gearbox Oil
Hydraulic System Oil
Diesel Fuel..
Bio-Diesel Fuel
Low Sulfur Diesel Fuel Conditioner.
Diesel Fuel Storage
Grease.
Diesel Engine Coolant
Supplemental Coolant Additives.
Lubricant Storage.
Alternative and Synthetic Lubricants.
Mixing of Lubricants.
Checking Skylight Regularly
Maintenance - Periodic Maintenance
Service Your Machine at Specified Intervals
Check the Hour Meter Regularly
Use Correct Fuels and Lubricants
Prepare Machine for Maintenance
Engine Break in Period.
Maintenance and Repair Record
Keeping System..
Fluid Analysis Program Test Kits and
3-Way Coolant Test Kit.
Periodic Maintenance Table
Maintenance - As Required
Check Air Filter Restriction Indicator.
Check Fire Extinguisher.
Drain Water and Sediment from Fuel Tank
Check and Drain Fuel/Water Separator.
Maintenance - Every 10 Hours or Daily
Check Engine Oil Level
Check Engine Air Filters and Ducting.
Check Engine Coolant Level
Check Fuel/Water Separator
Check Hydraulic Oil Level
Check Windshield Washer Fluid Level.
Check Swing Gearbox Oil Level (S.N.
-WC335Cx011319), (S.N. —
WC435CX012259)
Contents
Check Swing Gearbox Oil Level (S.N.
WC335CX011320-), (S.N.
WC435CX012260-)...
Check Hydraulic Filter Restriction Indicator
Inspect Grapple and Lubricate Grapple Pins
Lubricate Ring Gear and Turntable Bearing.
Lubricate Boom and Cylinder Pivots..
Lubricate Stabilizer and Cylinder Pins
Check Operation of Engine Gauges and
Waming Lights
Clean External Surfaces and Engine
Compartment
Check and Clean Radiator and Oil
Cooler Fins
Fil Fuel Tank..
Check and Clean Shroud.
Maintenance - Every 50 Hours or Weekly
Check Fire Extinguisher
Check Engine Mounting Bolts.
Check Pump Mounting Bolts
Check Loader Mounting Bolts Torque.
Visually Inspect Boom and Cylinder Pin
Retainers.
Check Stabilizer and Cylinder Pin Retainers.
Check Heel Mounting Bolts Torque
Lubricate Grapple Rotator
Maintenance - Initial Service - 100 Hours
Change Engine Oil and Filter.
Change Swing Gearbox Oil
Maintenance - Every 100 Hours
Check Seat Belt and Belt Support
Check Battery Electrolyte Level
Check Swing Gearbox Mounting Cap
Screws.
Maintenance - Every 250 Hours
Change Engine Oil and Filter.
Change Engine Fuel Fitter.
Drain Water and Sediment from Fuel Tank
Change Hydraulic Oil Return Filters
Clean Muffler
Maintenance - Every 500 Hours
Change Engine Air Filters.
Change Fuel/Water Separator Element
Visually Check Tumtable Bearing Mounting
Cap Screws.
Check Engine Fan Belt Tension.
PN=2
Maintenance - Every 1000 Hours
Change Swing Gearbox Oil .
Maintenance - Every 2000 Hours
Change Engine Coolant and Flush Cooling
System.
Change Hydraulic Oil
Check Engine Fan Belt and Tensioner.
Maintenance - Every 4500 Hours
Replace Engine Crankshaft Dampener.
Miscellaneous - Machine
Cooling System Pressure Test.
Fuel System Bleeding.
Inspecting and Cleaning Windows
Using Battery Charger.
Miscellaneous - Operational Checkout
Operational Checkout.
Inspection.
Gauges and Indicators.
Controls.
Attachments.
Accessories
Miscellaneous - Troubleshooting
General Troubleshooting.
Diagnose Engine.
Diagnose Electrical System
Diagnose Hydraulic System
Miscellaneous-Storage
Prepare Machine for Storage.
Monthly Storage Procedure
Miscellaneous --Serial Numbers
Model and Serial Number Record.
Keep Proof of Ownership .
Keep Machines Secure
Miscellaneous - Specifications
335C/435C Log Loader Machine
Dimensions.
Specifications.
Conversion Table for Pressures.

File Size: 2.16 MB
Total Page: 178

Language - English
File Format - PDF
Manual Download - Instant After Purchase is Completed

MAKE SURE YOUR EMAIL ADDRESS IS CORRECT. DON'T FORGET TO CHECK SPAM / JUNK IF CAN'T FIND THE DOWNLOAD LINK IN YOUR EMAIL INBOX IMMEDIATELY.

Credit & Debit Card - PayPal Secure Payments